Conner CFS1060A specifications
Updated: 06/30/2020 by Computer Hope
Jumper settings
| SINGLE DRIVE | PRIMARY DRIVE | SECONDARY DRIVE |
|---|---|---|
| C AND D JUMPED | C AND D JUMPED | C AND D NOT JUMPED |
CMOS settings
| MODEL (CFS SERIES) | SIZE | CYL | HDS | SECT | WPCOMP | LZONE | Type |
|---|---|---|---|---|---|---|---|
| CFS1060A | 1 GB | 516 | 64 | 63 | 0 | 0 | IDE |
Hard drive specifications
| Formatted capacity (MB=1,000,000): | 1278 |
| Cylinders: | 3687 |
| Sectors: | 78 - 144 |
| Heads: | 6 |
| Disks: | 3 |
| Buffer size: | 64 KB, segmented, adaptive |
| Average seek: | 15 ms |
| Single track: | 3.0 ms |
| Rotation speed/avg. latency | 3600 RPM / 8.3ms |
| Transfer rate to/from media: | up to 16.7 MB / Sec |
| Transfer rate to/from buffer: | |
| TPI | |
| BPI | |
| Size: | 1.0" Height x 4.0" Wide x 5.75" Depth |
| Weight: | 1.3 lbs |
Power requirements
| +12 Volts | +5 Volts | Power | |
| Read/write | 170 ma | 430 ma | 4.2 W |
| Seek | 290 ma | 430 ma | 5.6 W |
| Idle | 170 ma | 370 ma | 3.9 W |
| Standby | 0 ma | 190 ma | 1.0 W |
| Sleep | 0 ma | 190 ma | 1.0 W |
| Spin up (7 seconds) | 1200 ma | 500 amp | N.A. |