Conner CP3000 hard drive specifications
Updated: 06/30/2020 by Computer Hope
Jumper settings
| SINGLE DRIVE | PRIMARY DRIVE | SECONDARY DRIVE |
|---|---|---|
| ACT JUMPED C AND D JUMPED |
C AND D JUMPED DSP JUMPED |
NO JUMPERS INSTALLED |
CMOS settings
| MODEL (CFS SERIES) | SIZE | CYL | HDS | SECT | WPCOMP | LZONE | Type |
|---|---|---|---|---|---|---|---|
| CP3000 | 40 MB | 980 | 5 | 17 | 0 | 980 | IDE |
Hard drive specifications
| Formatted capacity (MB=1,000,000): | 42.8 MB |
| Cylinders: | |
| Sectors: | |
| Heads: | 2 |
| Disks: | 1 |
| Buffer size: | 8 KB, segmented, adaptive |
| Average seek: | 28 ms |
| Single track: | 11 ms |
| Rotation speed / Avg. latency: | 3557 rpm / 8.4 ms |
| Transfer rate to/from media: | 1.5 MB/sec |
| Transfer rate to/from buffer: | 4.5 MB/sec |
| TPI (tracks per inch): | 1400 |
| BPI (bits per inch): | 30,871 |
| Size: | 1.0" Height x 4.0" Wide x 5.75" Depth |
| Weight: | 1.1 lbs |
Power requirements
| +12 Volts | +5 Volts | Power | |
| Read/write | 230 ma | 275 ma | 4.2 W |
| Seek | 140 ma | 180 ma | 2.8 W |
| Idle | 120 ma | 120 ma | 2.0 W |
| Standby | 10 ma | 90 ma | 0.5 W |
| Sleep | N/A | N/A | N/A |
| Spin up (7 seconds) | 700 ma | 180 ma | N/A |