Conner CP30080E specifications
Updated: 06/30/2020 by Computer Hope
Jumper settings
| SCSI ID | Jumpers Installed |
| 0 | None |
| 1 | E1 |
| 2 | E2 |
| 3 | E1, E2 |
| 4 | E3 |
| 5 | E1, E3 |
| 6 | E2, E3 |
CMOS settings
| MODEL (CFS SERIES) | SIZE | CYL | HDS | SECT | WPCOMP | LZONE | Type |
|---|---|---|---|---|---|---|---|
| CP30080E | 85 MB | N/A | N/A | N/A | N/A | N/A | SCSI |
Hard drive specifications
| Formatted capacity (MB=1,000,000): | 85 MB |
| Cylinders: | 1806 |
| Sectors: | 46 |
| Heads: | 2 |
| Disks: | 1 |
| Buffer size: | 32 KB, segmented |
| Average seek: | 17ms |
| Single track: | 3ms |
| Rotation speed / Avg. latency: | 3833 rpm / 7.8ms |
| Transfer rate to/from media: | 2.0 MB/sec |
| Transfer rate to/from buffer: | 6.0 MB/sec |
| TPI (tracks per inch): | 2150 |
| BPI (KBits Per Inch) | 42,173 |
| Size: | 1.0" Height x 4.0" Wide x 5.75" Depth |
| Weight: | 1.3 lbs |
Power requirements
| +12 Volts | +5 Volts | Power | |
| Read/write | 140 ma | 390 ma | 3.75 W |
| Seek | 230 ma | 200 ma | 3.75 W |
| Idle | 120 ma | 200 ma | 2.50 W |
| Standby | 10 ma | 130 ma | 0.75 W |
| Sleep | N/A | N/A | N/A |
| Spin up (7 seconds) | 1100 ma | 420 ma | N/A |