Conner CFA170S specifications
Updated: 06/30/2020 by Computer Hope
Jumper settings
| SCSI_ID | ID1 | ID2 | ID3 |
|---|---|---|---|
| 0 | Out | Out | Out |
| 1 | In | Out | Out |
| 2 | Out | In | Out |
| 3 | In | In | Out |
| 4 | Out | Out | In |
| 5 | In | Out | In |
| 6 | Out | In | In |
| 7 | In | In | In |
CMOS settings
| MODEL (CFS SERIES) | SIZE | CYL | HDS | SECT | WPCOMP | LZONE | Type |
|---|---|---|---|---|---|---|---|
| CFA170S | 170 MB | N/A | N/A | N/A | N/A | N/A | SCSI |
Hard drive specifications
| Formatted capacity (MB=1,000,000): | 170 MB |
| Cylinders: | 2111 |
| Sectors: | 67-91 |
| Heads: | 2 |
| Disks: | 1 |
| Buffer size: | 64 KB, segmented |
| Average seek: | 13 ms |
| Single track: | 3 ms |
| Rotation speed / Avg. latency: | 4011 rpm / 7.5 ms |
| Transfer rate to/from media: | 2.9-4.1 MB/sec |
| Transfer rate to/from buffer: | 10 MB/sec |
| TPI (tracks per inch): | 2553 |
| BPI (bits per inch): | 56,833 |
| Size: | 1.0" High x 4.0" Wide x 5.75" Depth |
| Weight: | 1.16 lbs. |
Power requirements
| +12 Volts | +5 Volts | Power | |
| Read/write | 170 ma | 550 ma | 4.8 W |
| Seek | 300 ma | 520 ma | 6.2 W |
| Idle | 170 ma | 300 ma | 3.5 W |
| Standby | 30 ma | 215 ma | 1.4 W |
| Sleep | N/A | N/A | N/A |
| Spin up (7 seconds) | 1300 ma | 550 ma | N/A |